一种新颖的光纤应力传感器

基于模体积失配效应与微弯原理，提出了一种新颖的强度型光纤应力传感器，其传输光功率变化与应力之间近似为线性关系，重复性好，无迟滞现象     

用曲线大窗口平滑散斑条纹图的方法研究

提出一种计算条纹方向的简单算法,以及通过条纹方向图获得沿条纹方向的曲线窗口并对散斑条纹图进行曲线大窗口滤波的方法．实验表明此方法较好地消除了散斑条纹图的噪声,同时尽量减小了对条纹结构的损害．为从单幅散斑条纹图中应用条纹中心线法或全灰度法进一步提取相位场的后处理,奠定了良好的基础．     

纳米二氧化硅水溶胶成膜特性研究

研究了纳米SiO2水溶胶的固液二相流成膜特性．结果表明，水溶胶中的Si02固体颗粒的粒径及质量分数对粘度的影响较小，对成膜能力和承载能力的影响较大；在薄膜润滑阶段，固体颗粒的粒径和质量分数对润滑状态的稳定性具有一定的影响，随着速度的增加，液体膜厚度逐渐增大，固体颗粒对液体润滑膜稳定性及性能的影响逐渐减弱；在弹流润滑阶段，固体颗粒的影响很小。     

中心裂纹圆盘应力强度因子的测试误差分析

本文在中心裂纹圆盘应力强度因子解析解的基础上,利用一阶微分法则,给出了与裂纹相对长度和加载角相关的应力强度因子(K 和K )的4个误差传递函数。这4个误差传递函数关于裂纹相对长度和加载角均是非线性的,它们既是误差分析的基础,又是合理确定裂纹相对长度和加载角的基础。分析结果表明,加载角的误差Δθ除了对纯 型K 的误差几乎没有影响,对纯 型K 影响较小外,对复合型K 、K 的误差均有较大影响。最后,本文建议裂纹相对长度的取值范围为0.4～0.6;还建议在复合型断裂试验时,必须依据对K 、K 的总体精度要求来严格控制加载角的精度。     

EFFECTS OF FINELY DISPERSED METALLIC PALLADIUM ON MICROSTRUCTURE AND PROPERTIES OF NANOCOMPOSITES PRODUCED BY SOL-GEL TECHNIQUE

Nanosized palladium particles were incorporated into mesoporous silica matrix to obtain nanocomposites using the sol-gel technique. Effects of the finely dispersed metallic palladium on the microstructure and properties of the nanocomposites were investigated. By means of X-ray diffraction and optical absorption, it was found that palladium particles were 5-9 nm in diameter and their uniform dispersion in the mesoporous silica depended on both the content of the palladium and the structural features of the silica matrix. The results showed that the mixing method of preparation led to wider size distribution of the nanosized particles as compared to the immersion method, but dispersed degree was reduced. Although the incorporation of nanosized palladium particles could not substantially induce significant structural changes of the matrix, the apparent red-shifted optical absorptions for the nanocomposites were observed as compared to the parent monolithic silica, particularly with increase in palladium loading and calcination temperature.     

非保守圆薄板的轴对称振动和稳定性

建立了受切向均布随从力作用的圆薄板在面内周边可移、不可移两种情况下的轴对称控制方程，用打靶法直接导出求解变系数常微分方程特征值问题数值解的计算式．通过数值计算，给出了周边可移、不可移的简支、固支圆板自振频率和临界载荷的特征曲线以及相应的临界发散载荷，并分析了泊松比对圆板自振频率和临界载荷的影响．     

基于拓扑描述函数的连续体结构拓扑优化方法

提出了一种利用拓扑描述函数(TDF)作为拓扑设计变量求解连续体结构拓扑优化问题 的新方法. 优化问题的目标函数是结构的整体柔顺性，约束条件为对于可利用材料的体积限 制. 这种方法不仅可以消除拓扑优化中经常出现的棋盘格式等数值不稳定现象，而且能够有 效地抑制传统算法处理此类优化问题时所引发的边界扩散效应. 与其它的基于水平集描述函 数的拓扑优化方法相比，所提出的算法不仅无需求解控制水平集函数演化的双曲守恒方 程，而且合理地考虑了目标函数的拓扑导数信息，因而使得算法的计算效率有了显著的提高.     

An actuator-disc model for the prediction of abrupt stall in an axial compressor rotor

The representation of loss in a cascade by the appearance of blockage has been extended to deal with blade rows by the use of a source distribution to represent this blockage, and in the case of the actuator disc approximation, the presence of sources is confined to an axi-symmetric dìstribution over the actuator disc. It is found that if a typical dependence of loss (and consequently diffusion ratio) upon incidence for each section of an axial compressor rotor is represented in this manner, the influence of blockage on the axial velocity distribution may be found using the potential equation combined with the usual actuator disc approximation. Study of the behaviour of the controlling ordinary differential equation for the axial velocity ahead of the disc reveals that as the flow is reduced, the equation contains a singularity within the range of radius and a meaningful solution does not exist. This result is interpreted as the limit to continuous operation and reasonable agreement between this predicted limit and the appearance of abrupt stall (experimentally) is found.     

SYNTHESIS AND CHARACTERIZATION OF SURFACE-HYPERBRANCHED MAGNETITE NANOPARTICLE FOR BOVINE SERUM ALBUMIN IMMOBILIZATION

A hyperbranched polyamidoamine polymer was synthesized on the surface of magnetite nanoparticles to enhance bovine serum albumin (BSA) immobilization efficiency. The amount of immobilized bovine serum albumin (BSA) on the surface-hyperbranched magnetite nanoparticle was up to 2.5 times as much as that of magnetite nanoparticle modified with only amino silane.     

坡面流及土壤侵蚀动力学（II）——————土壤侵蚀

介绍了坡面土壤侵蚀的基本特征和主要类型, 综述了坡面土壤侵蚀动力学过程和预报模型等方面的研究进展, 包括土壤表层结皮、雨滴溅蚀、片流侵蚀、细沟侵蚀、坡面流输沙、土壤侵蚀界限坡度, 以及土壤侵蚀预报模型等. 并简要讨论了土壤侵蚀动力学研究的发展趋势.